AC Filter Changes & Basic Maintenance

A monthly 15-minute routine keeps your system efficient, protects the coil, and gives you early warning before a summer breakdown.

Safety first. Turn the thermostat off and switch off power to the air handler before you open any panel. Call a licensed HVAC contractor for anything involving refrigerant, electrical components, or the inside of the outdoor unit.

What you need

  • A replacement filter in the exact size printed on the frame of the old one
  • A flashlight and a vacuum with a brush attachment
  • A garden hose and a cup of distilled white vinegar

Step 1: Change the filter

  1. Find the filter. It's usually in the return air grille on a wall or ceiling, or in a slot at the air handler in a closet, hallway or attic.
  2. Note the size printed on the frame, for example 16 x 25 x 1, and buy the same size.
  3. Check the arrow on the frame. It should point toward the blower, in the direction of airflow.
  4. Slide out the old filter, vacuum the grille or slot, and slide the new filter in the same way.

For most Tampa homes, a pleated filter rated MERV 8 to 11 is a practical choice. Higher-rated filters can restrict airflow unless your system is designed for them.

How often to change it

Check the filter monthly during cooling season, and change it at least every one to three months. Change it sooner with pets, dust, or nearby construction. A clogged filter makes the system work harder, reduces airflow, and can freeze the coil.

Step 2: Care for the condensate drain

The indoor coil drains condensation through a small PVC line. A clogged drain causes leaks and can shut the system down. Find the drain access, usually a T-shaped fitting near the air handler. Once a month, pour about a cup of distilled white vinegar into the access port to help keep algae from building up.

Step 3: Clean the outdoor unit

  1. Turn off power to the outdoor unit at the disconnect box beside it.
  2. Clear leaves, grass clippings, and debris from around the unit, keeping about two feet of clearance on all sides.
  3. Rinse the fins gently with a garden hose, spraying from the inside out. Don't use a pressure washer, which can bend the fins.
  4. Restore power and confirm the fan runs.

Step 4: Check the thermostat

Replace the batteries in a battery-powered thermostat, confirm the set temperature and schedule, and make sure the system switches to cooling.

When to call a professional

  • The indoor coil or refrigerant lines are frosted or icy
  • Airflow is weak even with a clean filter
  • The breaker trips, or the system keeps switching on and off
  • Water leaks from the indoor unit after the drain is clear
  • The unit runs but doesn't cool, or smells of burning

Got a repair or replacement quote to check? Luxona reviews contractor proposals independently for homeowners.

This guide is general maintenance information, not a substitute for a licensed contractor's inspection. Follow the equipment manufacturer's instructions and your local code requirements.